Lube Tech Sweden AB

Varukorg

[ ... ] Varor
Gå till kassa
VirtueMart
Din varukorg är tom.
Webbshop : Hem » Produkter » Mobil1 » Mobil Jet Oil II
2011-10-28 12:22

Mobil Jet Oil II

Aircraft-Type Gas Turbine Lubricant

Product Description

Mobil Jet Oil II is a high performance aircraft-type gas turbine lubricant formulated with a combination of a highly stable synthetic base fluid and a unique chemical additive package.  The combination provides outstanding thermal and oxidative stability to resist deterioration and deposit formation in both the liquid and vapour phases, as well as excellent resistance to foaming. The effective operating range of Mobil Jet Oil II is between -40ºC (-40 ºF) and 204 ºC (400ºF). 

Mobil Jet Oil II is engineered for aircraft gas turbine engines used in commercial and military service requiring MIL-PRF-23699F-STD     level performance.  It also is recommended for aircraft-type gas turbine engines in industrial or marine service applications

Features and Benefits

Mobil Jet Oil II is formulated to meet the demanding requirements of aircraft-type gas turbines operating over a wide range of severe operating conditions. The product has a high specific heat in order to ensure good heat transfer from oil-cooled engine parts.  In extensive laboratory testing and in-flight performance, Mobil Jet Oil II exhibits excellent bulk oil stability at temperatures up to 204ºC (400 ºF).  The evaporation rate at these temperatures is low enough to prevent excessive loss of volume.  Key features and benefits include:

Features

Advantages and Potential Benefits

Excellent thermal and oxidation stability

Reduces the formation of carbon and sludge deposits

Maintains engine efficiency and extends engine life

Excellent wear and corrosion protection

Extends gear and bearing life Reduces engine maintenance

Retains viscosity and film strength across wide temperature range

Provides effective lubrication at high operating temperatures

Chemically stable

Reduces evaporation losses and lowers oil consumption

Low pour point

Eases start-up in low ambient temperature conditions

Applications

Mobil Jet Oil II is recommended for aircraft gas turbine engines of the turbo-jet, turbo-fan, turbo-prop, and turbo-shaft (helicopter) types in commercial and military service. It is also recommended for aircraft-type gas turbine engines used in industrial or marine applications. Mobil Jet Oil II is approved against the Standard Performance (STD) classification of U.S. Military Specification MIL-PRF-23699. It is also compatible with other synthetic gas turbine lubricants meeting MIL-PRF-23699. However, mixing with other products is not recommended because the blend would result in some loss of the performance characteristics of Mobil Jet Oil II. Mobil Jet Oil II is compatible with all metals used in gas turbine construction, as well as with F Rubber (Viton A), H Rubber (Buna N), and silicone seal materials.

Specifications and Approvals

Mobil Jet Oil II has the following builder approvals

Engines

-Honeywell/Lycoming-Turbine engines

X

-Rolls-Royce/Allison Engine Company

X

-CFM International

X

-General Electric Company

X

-IAE International

X

-Pratt and Whitney Group

X

-SNECMA

X

-Pratt and Whitney, Canada

X

-Rolls-Royce Limited

X

-Honeywell/Garrett-Turbine Engine Company

X

-Turbomeca

X

Accessories

-Honeywell-Auxiliary power units and air cycle machines

X

-Hamilton Standard-Starters

X

-Hamilton Sundstrand corp.- APUs, Constant-speed drives and integrated-drive generators

X

Mobil JetOil II

Approved against Mil-PRF-23699F-STD

X

PRI-QPL-AS5780/SPC

X

Typical Properties

Viscosity

cSt @ 40ºC (102ºF)

27.6

cSt @ 100ºC (212ºF)

5.1

cSt @ -40ºC (-40ºF)

11,000

% change @ -40ºC after 72 hours

0.15

Pour Point, ºC (ºF), ASTM D 97

-59 (-74)

Flash Point, ºC (ºF), ASTM D 92

270 (518)

Fire Point, ºC (ºF)

285 (545)

Autogenous Ignition Temp, ºC (ºF)

404 (760)

TAN (mg KOH/g sample)

0.03

Density @15 ºC, kg/l, ASMT D 4052

1.0035

Evaporation Loss, %

6.5 hr @ 204ºC, 29.5" Hg

3.0

6.5 hr @ 232ºC, 29.5" Hg

10.9

6.5 hr @ 232ºC, 5.5" Hg

33.7

(Equals pressure @ 40,000 Ft. altitude)

Foam, ml

Sequence I, 24ºC

8

Sequence II, 93.5ºC

10

Sequence III, 75ºC (after 200 F test)

8

Foam Stability, after 1 min settling, ml

0

Rubber Swell

F Rubber, 72 hr @ 204º C, %

15.6

H Rubber, 72 hr @ 70ºC, %

16.4

Sonic Shear Stability, KV @ 40ºC, change, %

0.9

Ryder Gear, Ave. lb/in % Hercolube A

2750 ,115

Prodkt detaljer

:

Om Lubetech

Lubetech är din kompletta leverantör av smörjmedel och kemtekniska produkter.


UC har tilldelat Lube Tech Sweden Certifikat med Högsta Kreditvärdighet- riskklass 5 - Guldcertifikat.

UC

Kontakt info

  • Adress: Skolvägen 43
    137 54 Tungelsta
     
    Mobiltelefon: +46 70 461 09 96
    Telefon / Fax: +46 8 745 40 18
    Växeltel: 08-230040

    E-mail: peter[a]lubetech.nu, order[a]lubetech.nu